Skip to main content
Ctrl+K
Logo image Logo image

Observatory Operations

Site Navigation

  • Safety
  • Simonyi
  • AuxTel
  • Observatory
  • Communications
  • Contribute
  • Setup
  • Rubin docs

Site Navigation

  • Safety
  • Simonyi
  • AuxTel
  • Observatory
  • Communications
  • Contribute
  • Setup
  • Rubin docs

Section Navigation

  • ATCS
  • AT Calibration System
  • Cabinet Content Diagrams
  • LATISS
  • PDU Outlet Mapping
  • AuxTel EUI Access

Weather Constraints

  • AuxTel Weather Constraints

Standard Operations

  • AuxTel Standard Operations
    • Daytime Operations
      • Daytime Checkout
      • Prepare for vent
      • LATISS Combined Calibrations Generation Procedure
      • LATISS Daily Calibrations BIAS, DARK and FLAT: all filters + empty
      • LATISS Daily Calibrations BIAS and DARK only
      • Prepare ATCS For Flat Fields
    • Nighttime Operations
      • Prepare for On-Sky Operations
      • Monitoring LATISS Disperser Wheel Position
      • Scheduler Night-time Operation
      • Shutdown

Non-Standard Operations

  • AuxTel Non-standard Operations
    • ATCS
      • AuxTel LOTO Procedure
      • Verify Telescope and Dome Drives Interlocks
      • Center, absorb pointing offsets, mirror alignment and focus
      • AuxTel E-Stop Procedure
    • LATISS
    • AT Calibration System
    • AuxTel Emergency Shutdown
    • AuxTel Recovery after Shutdown

Troubleshooting

  • AuxTel Known Faults
    • ATCS
      • ATDome Fails to Arrive in Position
      • ATDome Lost Communication with the Top-End
      • ATHexapod fails to enable with the rest of ATCS
      • AuxTel Mount Control System Fails to Enable / E-Stop is Engaged
      • AuxTel Mount Fails to Move
      • AuxTel Mount Fails to Move and Times Out
      • AuxTel M1 Cover Fails to Open
    • LATISS
      • ATDewar Alarm - LATISS CCD overcooling
      • AT camera recovery
      • ATSpectrograph Recovery
    • AT Calibration System
      • ATMonochromator Fault
    • General Troubleshooting
      • AuxTel Elevation Out of range
      • AuxTel Image out of focus
      • AuxTel Lost Pointing Accuracy
      • AuxTel Rotator Out Of Range

SAL Scripts

  • Common AuxTel Scripts & Configurations

ATCSΒΆ

This includes troubleshooting of the CSCs that control the telescope and dome movement.

  • ATDome Fails to Arrive in Position
  • ATDome Lost Communication with the Top-End
  • ATHexapod fails to enable with the rest of ATCS
  • AuxTel Mount Control System Fails to Enable / E-Stop is Engaged
  • AuxTel Mount Fails to Move
  • AuxTel Mount Fails to Move and Times Out
  • AuxTel M1 Cover Fails to Open

previous

AuxTel Known Faults

next

ATDome Fails to Arrive in Position
Edit this page

© Copyright 2015-2022 Association of Universities for Research in Astronomy, Inc. (AURA).

Built with the PyData Sphinx Theme 0.12.0.

Created using Sphinx 8.1.3.